Amaker 600 For BMW N55 PWG (Not for EWG)

Overview

This turbo is for the BMW N55 engine, it is ideal for those looking for a quick spool turbo and overall power as well as top-end power. In the mid-RPM, the output is very stable and continuous all the way to the max power.
The maximum horsepower is expected to reach 600HP.

Application for：

N55 2008-2014 PWG TURBO for BMW M135 M235 335i 435i 535i 640i 740i

Features

• Direct Bolt-On with accessory kit ; easy and convenient to install.
  
  
• Dual ceramic ball bearing
  The low friction allows the bearing to work at much lower required force and gives a boost at earlier RPM. The ceramic ball is made of  Si3N4 high-precision fine ground ceramic ball. The spherical surface is in a perfect mirror state.  With the match of the high-temperature, wear-resistant, shock-resistant and lightweight retainer cage, our bearings give an earlier boost than other ball bearings !

• The upgraded aero grade aluminum billet compressor wheel allows higher intake air volume and improves air inlet efficiency.
  

• With the upgraded intake pipe, it increases the air intake efficiency and improves restriction.

• The exhaust housing is made of high temperature-resistant D5S cast iron. It will withstand continuous extreme temperature and pressure.

• Direct Bolt-On；can be installed using the original parts, easy and convenient to install.

• Upgraded compressor outlet
  With the deletion of the muffler and a straight-through section, it optimizes the airflow, reducing surge.

• The turbine housing valve parts are made of heat-resistant, corrosion-resistant, high-strength alloy Inconel or SUS310, which withstands long-term high temperature and valve opening-closing impacts.

• The upgraded aero grade aluminum billet compressor wheel allows higher intake air volume and improves air inlet efficiency.

• This upgraded high-flow turbine wheel comes with Inconel alloy. It consists of metal nickel as high as 70%, able to withstand higher temperature and pressure.  As to the blade design, it offers much higher efficiency in terms of airflow, smoother exhaust and backpressure reduction.  In return, we have much better wheel performance
  
  
• The turbine housing valve parts are made of heat-resistant, corrosion-resistant, high-strength alloy, which can withstand long-term high temperature and valve closing impacts.
  
  
• The exhaust housing is made of high temperature-resistant D5S cast iron and is able to resist continuous extreme temperature and pressure, heat and corrosion.
  
  
• Balanced by Schenck balancing machine
  Precise balancing is one of the essential procedures in Amaker Turbo production. Due to a good balance is always an important factor in having an outstanding performance and reliability of a turbocharger. A good balance can also improve the noise generated by the high-speed operation. We have very strict operating standards for balance.  First, we perform a low-speed dynamic balancing on a high-precision single-piece balancing machine in order to achieve the best balance of the parts. Secondly, we rigorously assemble the CHRA parts. After the assembly is completed, the high-speed dynamic balance is then performed. Our high-speed dynamic balancing machine can reach a maximum speed of 250,000 RPM.  This balancing standard surpasses the OEM standards.  Each turbo is accompanied by a serial number and the balance test result is kept in our database.

---

Accessories

---

---

The wheel comparison

---